6-25
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 6 ASH Commands
6.7.1 user entry create Command
6.7.1 user entry create Command
Command Types user entry create
Syntax Description
user entry create
name user_mode
Creates a new user. The parameters required to create a new user are user name, access level, and
password.
The user_mode (access privilege level) is set by entering either read, read_write, or read_write_admin.
See Table 6-1 on page 6-1 for the command privileges of each user level. The password must be an ASCII
string of up to 10 characters, where at least 2 are non-alphabetic characters with at least one special character.
Special characters are +, #, and %. See Example 6-27.
Example 6-27 user entry create Command
ash:
hostname
:ONS15216 EDFA2>
user entry create jdoe read_write
New Password =
**********
Confirm New Password =
**********
6.7.2 user entry edit Command
Command Types user entry edit
Syntax Description
user entry edit
username
Edit a user’s parameters (name, password, and access level). This command uses the optional parameters
shown at the beginning of Example 6-28. The -user_mode parameter changes the access level (read,
read_write, or read_write_admin). If the password is not to be changed, hit the Enter key when the new
password is requested and confirmed, as shown in Example 6-29. This keeps the password unchanged.
Example 6-28 user entry edit Command (Change Password)
ash:
hostname
:ONS15216 EDFA2>
user entry edit
Options
-new_user_name (string[0..10]) new name of user
-user_mode (string[0..16]) mode of user
Parameters
user_name (string[0..10]) name of user
ash:
hostname
:ONS15216 EDFA2>
user entry edit jsmith
New Password =
******
Confirm New Password =
******
Example 6-29 user entry edit Command (Change Access Level)
ash:
hostname
:ONS15216 EDFA2>
user entry edit jsmith -user_mode read_write
Comments to this Manuals