6-27
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 6 ASH Commands
6.7.6 user passwd set Command
Inactivity is the length of time of user inactivity before the user is automatically logged off. Type the
user inactivity modify command to change the inactivity values. Type the user inactivity display
command to display the current inactivity values.
The default inactivity values for the read, read_write, and read_write_admin user access levels are 60,
30, and 15 minutes, respectively. Possible values are 0 to 99 (in minutes). A value of 0 means no timeout.
See Example 6-32 and Example 6-33.
Example 6-32 user inactivity modify Command
ash:
hostname
:ONS15216 EDFA2>
user inactivity modify read 75
Example 6-33 user inactivity display Command
ash:
hostname
:ONS15216 EDFA2>
user inactivity display
Mode Inactivity
read_write_admin 15
read_write 30
read 75
6.7.6 user passwd set Command
To restrict access to the ONS 15216 EDFA2, use the user passwd set command to change the default
user password. Example 6-34 displays the user passwd set syntax for a current user. Example 6-35
displays the user passwd set username command for changing another user’s password.
The password must be an ASCII string of up to 10 characters, where at least 2 are non-alphabetic
characters with at least one special character. Special characters are +, #, and %. With the exception of
the read_write_admin level user, the user can only modify their own password.
Example 6-34 Changing Current User’s Password
ash:
hostname
:ONS15216 EDFA2>
user passwd set
Password =
*****
New Password =
*******
Confirm New Password =
*******
Example 6-35 Changing Another User’s Password
ash:
hostname
:ONS15216 EDFA2>
user passwd set jdoe
Password =
****
New Password =
******
Confirm New Password =
******
Note The default user name for the administrator level is CISCO15 with no default password. To start a
session for this user name, press Enter.
Comments to this Manuals