Cisco SCE8000 Specifications download pdf (Page 123)

100

101

2-83

Cisco SCE 8000 CLI Command Reference

Chapter 2 CLI Command Reference

clock summertime

Configures the Cisco SCE platform to automatically switch to daylight saving time on a specified date,

and also to switch back to standard time. In addition, the time-zone code can be configured to vary with

daylight saving time if required. (For example, in the eastern United States, standard time is designated

as EST, and daylight saving time is designated as EDT).

To cancel the daylight saving time transitions configuration, use the no form of this command.

clock summertime

no clock summertime

Syntax Description

Command Default For recurring configurations, offset is 60 minutes.

The following recurrent time changes are configured:

• Daylight saving time begins at 2:00 (a.m.) on the second Sunday of March.

• Daylight saving time ends at 2:00 (a.m.) on the first Sunday of November.

zone Code for the time zone for daylight saving time.

week1/week2 Week of the month on which daylight saving time begins (week1) and ends

(week2). A day of the week, such as Monday, must also be specified. The

week/day of the week is defined for a recurring configuration only.

Default: Not used

day1/day2 Day of the week on which daylight saving time begins (day1) and ends

(day2).

For recurring configurations, day is a day of the week, such as Sunday.

(Use the first and last keywords to specify the occurrence of a day of the

week in a specified month. For example, last Sunday March.)

For nonrecurring configurations, day is a date in the month, such as 28.

Defaults: day1 is second Sunday, day2 is first Sunday

month1/month2 Month in which daylight saving time begins (month1) and ends (month2).

Defaults: month1 is March, month2 is November

year1/year2 Year in which daylight saving time begins (year1) and ends (year2).

For nonrecurring configurations only.

Default: Not used

time1/time2 Time of day (24-hour clock) at which daylight saving time begins (time1)

and ends (time2).

Required for all configurations.

Default: time1 and time2 is 2:00

offset Difference in minutes between standard time and daylight saving time.

Default: 60

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 777 778

Cisco SCE8000 Specifications Page 123

Comments to this Manuals