2-22
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
attack-detector
attack-detector
Enables the specified attack detector and assigns an access control list (ACL) to it.
attack-detector number access-list access-list
Syntax Description
Command Default None
Command Modes Interface Linecard Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Use the following commands to define the attack detector and the ACL:
• attack-detector
• access-list
Authorization: admin
The following example shows how to enable attack detector number 2 and assign ACL 8:
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface LineCard 0
SCE8000(config if)#attack-detector 2 access-list 8
SCE8000(config if)#
Related Commands
number Number of the attack detector.
access-list Number of the ACL containing the IP addresses selected by this detector.
Release Modification
2.5.7 This command was introduced.
Command Description
access-list Adds an entry to the bottom of the specified access list.
attack-detector number Configures a specific attack detector for a particular attack
type with the assigned number.
show interface linecard attack-detector Displays the configuration of the specified attack detector.
show access-lists Displays all access lists or a specific access list.
Comments to this Manuals