2-510
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
show interface mng
show interface mng
Displays information regarding the specified management interface.
show interface mng {0/1 | 0/2} [auto-fail-over|duplex|ip address|speed]
Syntax Description This command has no arguments.
Command Default This command has no default settings.
Command Modes User Exec
Command History This table includes the following release-specific history entries:
Usage Guidelines Use this command to display the following information for the specified management interface:
• speed
• duplex
• IP address
• auto-fail-over
If no keyword is specified, all information is displayed.
Speed and duplex parameters are specific to the selected interface (port), while other parameters apply
to both ports and are displayed by a command to either interface.
Authorization: viewer
Examples This example shows how to display all information for Management port 1.
SCE8000>enable 5
Password:<cisco>
SCE8000>show interface mng 0/1
ip address: 10.1.6.145
subnet mask: 255.255.0.0
Configured speed: auto, configured duplex: auto
AutoNegotiation is On, link is Up, actual speed: 100, actual duplex: half
SCE8000>
Related Commands
Release Modification
3.0.3 This command was introduced.
Command Description
interface mng Enters interface management configuration mode.
Comments to this Manuals