2-162
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
flow-capture controllers
Examples The following example shows how to configure limitations to the flow capture:
SCE8000>enable 10
Password:<cisco>
SCE8000#>configure
SCE8000(config)#interface linecard 0
SCE8000(config if)#flow-capture controllers time 120
SCE8000(config if)#flow-capture controllers max-l4-payload-length 200
SCE8000(config if)#
Related Commands Command Description
traffic-rule Defines a new traffic rule.
flow-capture Executes flow capture operations.
show interface linecard flow-capture Displays the flow capture status.
Comments to this Manuals