Cisco SCE8000 Specifications Page 253

  • Download
  • Add to my manuals
  • Print
  • Page
    / 778
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 252
2-213
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
ip ssh mng-vlan
ip ssh mng-vlan
Assigns the specified VLAN to SSH services.
Use the no form of the command to remove the VLAN configuration for SSH services.
ip ssh mng-vlan vlan-id
no ip ssh mng-vlan
Syntax Description
Command Default None
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines You can create separate VLAN interfaces on the management interface in order to differentiate between
various management and control services. There are two steps in this process:
1. Create the VLAN and assign the IP address (mng-vlan command).
2. Assign the VLAN to a management service.
Authorization: admin
Examples The following example shows how to configure a VLAN for SSH services.
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#mng-vlan 100 address 10.10.10.20 mask 255.255.255.0
SCE8000(config)#ip ssh mng-vlan 100
SCE8000(config)#
The following example shows how to remove the VLAN for SSH services.
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#no ip ssh mng-vlan
SCE8000(config)#
vlan-id VLAN tag to be assigned to SSH services (1-4094).
Release Modification
3.7.x This command was introduced.
Page view 252
1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 777 778

Comments to this Manuals

No comments