2-226
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
ip-tunnel dscp-marking-skip
SCE8000>enable 15
Password:<cisco>
SCE8000#> configure
SCE8000(config)#>interface linecard 0
SCE8000(config if)#>shutdown
SCE8000(config if)#>ip-tunnel ipinip dscp-marking-skip
SCE8000(config if)#>no shutdown
Related Commands Command Description
ip-tunnel gre skip Enables the recognition of G RE tunnels and skipping into the internal IP
packet.
ip-tunnel ipinip skip Enables the recognition of IPinIP tunnels and skipping into the internal IP
packet.
Comments to this Manuals