2-238
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
link mode
link mode
Configures the link mode. The link mode allows you to force the specified behavior on the link, which
may be useful during installation and for debugging the network.
link mode {all-links mode}
Syntax Description
Command Default None
Command Modes Interface Linecard Configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: admin
Examples The following example shows how to use this command:
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE8000(config if)#link mode all-links bypass
Related Commands
all-links Sets the link mode for all links. (The link mode cannot be set separately for
individual links.)
mode Establishes the link mode. Choose forwarding, bypass, or cutoff.
Release Modification
2.5.7 This command was introduced.
Command Description
show interface linecard link mode Displays the configured Linecard Interface link mode.
Comments to this Manuals