2-251
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
logging message-counter
logging message-counter
Enables message counter in the syslog message.
To disable the message counter, use the no form of this command. When the message counter is disabled,
no line count appears in the syslog messages.
logging message-counter
no logging message-counter
Syntax Description This command has no arguments or keywords.
Command Default By default, the syslog message counter is enabled.
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: admin
Examples The following example shows how to disable the syslog message counter.
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#no logging message-counter
SCE8000(config)#
Related Commands
Release Modification
3.6.x This command was introduced.
Command Description
logging on Enables logging to a syslog server.
Comments to this Manuals