2-301
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
os-fingerprinting scan-port
Examples The following example shows how to set the OS fingerprinting to use port 100.
SCE8000>enable 10
Password:<cisco>
SCE8000#configure
SCE8000#config)# interface linecard 0
SCE8000(config if)# os-fingerprinting
OsFingerPrint enable success
SCE8000(config if)# os-fingerprinting scan-port 100
SCE8000(config if)#
Related Commands Command Description
os-fingerprinting Enables OS fingerprinting and loads the default.fp signature
file.
show os-fingerprinting config Displays the current OS fingerprinting configuration.
Comments to this Manuals