2-370
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
service password-encryption
service password-encryption
Enables password encryption so that the password remains secret when the configuration file is
displayed.
To disable password encryption, use the no form of this command.
service password-encryption
no service password-encryption
Syntax Description This command has no arguments or keywords.
Command Default Password encryption is disabled.
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Passwords that were configured in an encrypted format are not deciphered when password encryption is
disabled.
Authorization: admin
Examples The following example shows the effect of enabling password encryption:
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#enable password abcd
SCE8000(config)#do more running-config
#This is a general configuration file (running-config).
#Created on 10:20:57 ISR TUE July 3 2001
…
enable password level 10 0 “abcd”
…
SCE8000(config)#service password-encryption
SCE8000(config)#do more running-config
#This is a general configuration file (running-config).
#Created on 10:21:12 ISR TUE July 3 2001
…
service password-encryption
enable password level 10 0 “e2fc714c4727ee9395f324cd2e7f331f”
…
SCE8000(config)#
Release Modification
2.5.7 This command was introduced.
Comments to this Manuals