2-658
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
sntp server
sntp server
Enables the SNTP unicast client to query the specified SNTP server.
To disable the SNTP unicast server, use the no form of this command.
sntp server {address | hostname}
no sntp server hostname
no sntp server all
Syntax Description
Command Default The SNTP unicast server is disabled.
Command Modes Global configuration
Command History This table includes the following release-specific history entries:
Usage Guidelines Authorization: admin
Examples The following example shows how to enable an SNTP server at a specified IP address:
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#sntp server 128.182.58.100
SCE8000(config)#
Related Commands
address IP address of the SNTP server.
hostname Hostname of the SNTP server.
all Used with the no form of this command, disables all SNTP unicast servers.
Release Modification
2.5.7 This command was introduced.
Command Description
show sntp Displays the SNTP configuration and update statistics.
sntp broadcast client Enables the SNTP multicast client to accept SNTP broadcasts from any
SNTP server.
sntp update-interval Defines the interval between SNTP unicast update queries.
Comments to this Manuals