Cisco SCE8000 Specifications download pdf (Page 707)

100

101

2-667

Cisco SCE 8000 CLI Command Reference

Chapter 2 CLI Command Reference

subscriber capacity-options

To override the capacity option when loading the SCA BB application, use the disable form of this

command.

To reenable the capacity option, use the enable form of this command.

subscriber capacity-options {enable | disable}

Syntax Description This command has no arguments or keywords.

Command Default The capacity option is enabled.

Command Modes Interface Linecard Configuration

Command History This table includes the following release-specific history entries:

Usage Guidelines You must first define the maximum number of subscribers using the subscriber max-subscribers

command.

You must override the capacity option before installing the pqi file.

If you have disabled the capacity option but want to use it the next time you load a new application, you

must reenable the option before you load the application file.

Caution If you have applied a policy configuration (PQB file) to the Cisco SCE platform, you must retrieve it and

save it before loading an application file. Then reapply it after the executing the command and loading

the PQI file. (PQB files are managed from the SCA BB console.)

Authorization: admin

Examples The following example shows how to use this command:

SCE8000>enable 10

Password:<cisco>

SCE8000#config

SCE8000(config)#interface linecard 0

SCE8000(config if)#subscriber max-subscribers 500K

SCE8000(config if)#subscriber capacity-options disable

SCE8000(config if)#pqi install file mov2008.pqi

Release Modification

3.5.0 This command was introduced.

1 2 ... 702 703 704 705 706 707 708 709 710 711 712 ... 777 778

Comments to this Manuals

No comments

Cisco SCE8000 Specifications Page 707

Comments to this Manuals