2-682
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
subscriber sm-connection-failure
Examples The following example shows how to configure forced failure of the Cisco SCE platform if the SM fails:
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE (config if)#subscriber sm-connection-failure action force-failure
SCE (config if)#
The following example shows how to set the timeout interval to 2 minutes (120 seconds):
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE (config if)#subscriber sm-connection-failure timeout 120
SCE (config if)#
Related Commands Command Description
show interface linecard subscriber sm-connection-failure Displays the current state of the
SM-SCE platform connection, as well
as the configured action to take if that
connection fails.
Comments to this Manuals