2-34
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
attack-filter dont-filter | force-filter
The following example shows how to force attack filtering:
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE8000(config if)#attack-filter force-filter protocol TCP dest-port not-specific
attack-direction dual-sided source-ip 10.10.10.10 destination-ip 20.20.20.20 side both
SCE8000(config if)#
The following example shows how to stop all forced attack filtering:
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE8000(config if)#no attack-filter force-filter all
SCE8000#
Related Commands Command Description
attack-filter Enables specific attack detection for a specified protocol and attack
direction.
Comments to this Manuals