2-705
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
traffic-rule ipv6
• ip-range is an IP subnet range in the CIDR notation followed by the number of significant bits (such
as 2001:DB8:0:1:FFFF:1234::5).
Protocol
Any one of the following:
• TCP
• UDP
• all
Port Specification
port
• Specify a port only if the protocol is either TCP or UDP.
• Specify a port for both the subscriber side and the network side.
• Create multiple rules if you plan to use multiple ports.
Direction
Any of the following:
• Upstream
• Downstream
• both
Traffic Counter Name
Specify either:
• name of an existing traffic counter—Packets that meet the criteria of the rule are to be counted in
the specified counter.
If a counter name is defined, the count action is also defined implicitly.
• none—An action must be explicitly defined with the action keyword.
Action
Specify one of the following options:
• block—Blocks the specified traffic.
• classical-open-flow-mode—Use the classical open flow mode for the specified flow.
• ignore—Bypasses the specified traffic. The traffic receives no service.
Authorization: admin
Examples The following examples show how to use this command.
Example 1
The following example shows how to create a traffic rule called rule2:
• Name — rule2
• IP addresses — subscriber side — all, network side — all
• Protocol — TCP
Comments to this Manuals