2-720
Cisco SCE 8000 CLI Command Reference
Chapter 2 CLI Command Reference
vas-traffic-forwarding vas server-id health-check
If the health check of the server is disabled, its operational status depends on the following (requirements
for Up state are in parentheses):
• admin status (enable)
• VLAN tag configuration (VLAN tag defined)
• group mapping (assigned to group)
Authorization: admin
Examples The following examples illustrate how to disable the health check, and how to define the UDP ports.
Example 1
This example shows how to disable the health check for VAS server 5.
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE8000(config if)#no vas-traffic-forwarding vas server-id 5 health-check
SCE8000(config if)#
Example 2
This example shows how to define the source and destination ports for VAS server 5 and enable the
health check.
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE8000(config if)#vas-traffic-forwarding vas server-id 5 health-check udp ports source
63150
destination 63151
SCE8000(config if)#vas-traffic-forwarding vas server-id 5 health-check
SCE8000(config if)#
Example 3
This example shows how to remove the UDP port configuration using the no keyword.
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE8000(config if)#no vas-traffic-forwarding vas server-id 5 health-check udp ports
SCE8000(config if)#
Example 4
This example shows how to remove the UDP port configuration using the default keyword.
SCE8000>enable 10
Password:<cisco>
SCE8000#config
SCE8000(config)#interface linecard 0
SCE8000(config if)#default vas-traffic-forwarding vas server-id 5 health-check udp ports
SCE8000(config if)#
Comments to this Manuals