2-29
Cisco ONS 15454 SDH Installation and Operations Guide, R3.3
May 2002
Chapter 2 Set up PC and Log into CTC
Printing CTC Data
Step 1 From the CTC Edit menu, select Preferences.
Step 2 On the Preferences dialog box, select the Firewall tab.
Step 3 Under CTC CORBA (IIOP) Listener Port, set the listener port option:
• Default - Variable—Used to connect to ONS 15454 SDH from within a firewall or if no firewall is
used
• Standard Constant (683)—Uses port 683
• Other Constant—Allows you to specify an IIOP port defined by your administrator
Step 4 Click Apply to apply the change.
Step 5 Click OK to close the screen.
2.7 Printing CTC Data
You can print CTC windows and table data such as alarms and inventory. You can also export CTC table
data for use by other applications such as spreadsheets, word processors, and database management
applications.
Procedure: Print CTC Window and Table Data
Step 1 From the CTC File menu, click Print.
Step 2 In the Print dialog (Figure 2-7) choose an option:
• Entire Frame—Prints the entire CTC window
• Tabbed View—Prints the lower half of the CTC window
• Table Contents—Prints CTC data in table format; this option is only available for CTC table data
(see Figure 2-7)
Purpose Use the following procedure to print CTC windows and table data. Before
you start, make sure your PC is connected to a printer.
Prerequisite Procedures “Logging into CTC” procedure on page 2-22
Onsite/Remote Onsite or remote
Comments to this Manuals