Cisco ONS 15454 SDH Specifications download pdf (Page 95)

100

101

2-11

Cisco ONS 15454 SDH Installation and Operations Guide, R3.3

May 2002

Chapter 2 Set up PC and Log into CTC

Setting Up the CTC Computer

JRE=[your JRE path]

NETSCAPE=[your Netscape path]

NPX_PLUGIN_PATH=$JRE/j2re1_3_1_02/plugin/sparc/ns4

PATH=/usr/openwin/bin:$NETSCAPE:$PATH

export JRE NPX_PLUGIN_PATH PATH

Step 2 Set the JRE reference:

a. Run the Control Panel by typing:

[JRE path]/j2re1_3_1_02/bin/ControlPanel

b. Click the Advanced tab.

c. From the combo box, select [JRE path]/j2re1_3_1_02. If the JRE is not found, select other and

enter the following in the Path text box:

[JRE path]/j2re1_3_1_02

d. Click Apply. Proceed to the “Setting Up the CTC Computer” section on page 2-11.

Note If you are running multiple shells, before your new environment variable will be set you may

need to invoke the same shell for which you changed the initialization file (for example, if

you added the environment variable to the .cshrc file, you must run your browser under the

csh shell.

2.4 Setting Up the CTC Computer

Before you run CTC on your Windows PC or Solaris workstation, you need to set up the computer for

the specific method you will use to connect to the ONS 15454 SDH. Table 2-6 on page 2-12 lists the

methods for connecting to the ONS 15454 SDH. Use the table to find the connection method you will

use and check the Requirements column before performing the set up procedures.

Note For initial shelf turn up, you must use a direct connection to the ONS 15454 SDH.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 503 504

Comments to this Manuals

No comments

Cisco ONS 15454 SDH Specifications Page 95

Comments to this Manuals

Related products and manuals for Security access control systems Cisco ONS 15454 SDH