Cisco ONS 15454 SDH Specifications download pdf (Page 177)

100

101

4-9

Cisco ONS 15454 SDH Installation and Operations Guide, R3.3

May 2002

Chapter 4 IP Networking

Scenario 6: Static Route for Multiple CTCs

Figure 4-7 Create static route dialog box

Step 3 In the Create Static Route dialog box enter the following:

• Destination—Enter the IP address of the computer running CTC. To limit access to one computer,

enter the full IP address (in the example, 192.168.1.100). To allow access to all computers on the

192.168.1.0 subnet, enter 192.168.1.0 and a subnet mask of 255.255.255.0. You can enter a

destination of 0.0.0.0 to allow access to all CTC computers that connect to the router.

• Mask—Enter a subnet mask. If the destination is a host route (i.e., one CTC computer), enter a 32-bit

subnet mask (255.255.255.255). If the destination is a subnet, adjust the subnet mask accordingly,

for example, 255.255.255.0. If the destination is 0.0.0.0, enter a subnet mask of 0.0.0.0 to provide

access to all CTC computers.

• Next Hop—Enter the IP address of the router port (in this example, 192.168.90.1) or the node IP

address if the CTC computer is connected to the node directly.

• Cost—Enter the number of hops between the ONS 15454 SDH and the computer. In this example,

the cost is two, one hop from the ONS 15454 SDH to the router and a second hop from the router to

the CTC workstation.

Step 4 Click OK. Verify that the static route displays in the Static Route window, or ping the node.

4.7 Scenario 6: Static Route for Multiple CTCs

Scenario 6 shows a static route used when multiple CTC computers need to access ONS 15454 SDHs

residing on the same subnet (Figure 4-8). In this scenario, CTC #1 and #2 and all ONS 15454 SDHs are

on the same IP subnet; ONS 15454 SDH #1 and CTC #1 are attached to LAN A. ONS 15454 SDH #2

and CTC #2 are attached to LAN B. Static routes are added to ONS 15454 SDH #1 pointing to CTC #1,

and to ONS 15454 SDH #2 pointing to CTC #2. The static route is entered from the node’s perspective.

71456

Network tab

Static Routing

tab

Create Static Route

dialog box

Node viewProvisioning tab

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 503 504

Comments to this Manuals

No comments

Cisco ONS 15454 SDH Specifications Page 177

Comments to this Manuals

Related products and manuals for Security access control systems Cisco ONS 15454 SDH