Cisco ONS 15454 SDH Specifications download pdf (Page 309)

100

101

8-5

Cisco ONS 15454 SDH Installation and Operations Guide, R3.3

May 2002

Chapter 8 SDH Performance Monitoring

Using the Performance Monitoring Screen

Note If a complete count over a 1 day period is not possible, the value displays with a yellow background.

An incomplete or incorrect count can be caused by changing node timing settings, changing the time

zone settings on CTC, replacing a card, resetting a card, or by changing port states. When the

problem is corrected, the subsequent 1 day period appears with a white background.

8.1.3 Viewing Near End and Far End PMs

Select the Near End or Far End button depending on the PMs you wish to view. Only cards that allow

both near-end and far-end monitoring have these buttons as an option. Figure 8-3 shows the Near End

and Far End buttons on the Performance Monitoring screen.

Figure 8-3 Near End and Far End buttons on the card view Performance tab

Procedure: Select Near End PMs on the Performance Monitoring Screen

Purpose Select the Near End button to view PMs on the near end.

Prerequisite Procedures Before you view PMs, be sure you have created the appropriate circuits

and provisioned the card according to your specifications. For

information about circuit creation and card provisioning, see Chapter 6,

“Circuits and Tunnels” and Chapter 7, “Card Provisioning.”

Onsite/Remote Onsite or remote

71061

Near End and Far End buttons

1 2 ... 304 305 306 307 308 309 310 311 312 313 314 ... 503 504

Comments to this Manuals

No comments

Cisco ONS 15454 SDH Specifications Page 309

Comments to this Manuals

Related products and manuals for Security access control systems Cisco ONS 15454 SDH