6-69
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Alert-Level Alarms
Cisco Unified Serviceability Alarm Definition Catalog
System/TFTP
Severity
Alert (1)
Parameters
Error [Int] IPAddress [String] Port [Int]
Recommended Action
Use RTMT to monitor the system memory resources and consumption and correct any system issues that
might be contributing to a reduced amount of system resources.
TFTPServerListenBindFailed
Fail to connect to the network port through which file requests are received. This usually happens if the
network port is being used by other applications on the system or if the port was not closed properly in
the last execution of TFTP server.
Facility/Sub-Facility
CCM_TFTP-TFTP
Cisco Unified Serviceability Alarm Definition Catalog
System/TFTP
Severity
Alert (1)
Parameters
Error [Int] IPAddress [String] Port [Int]
Recommended Action
Verify that the port is not in use by other application. After stopping the TFTP server, at the command
line interface (CLI) on the TFTP server, execute the following command—show network status listen.
If the port number specified in this alarm is shown in this CLI command output, the port is being used.
Restart the Cisco Unified Communications Manager system, which may help to release the port. If the
problem persists, go to Cisco Unified Serviceability and enable Detailed level traces in the Trace
configuration window for the TFTP service and contact the Cisco Technical Assistance Center (TAC).
History
Cisco Unified Communications
Release Action
7.0(1) Name changed from kTFTPServerListenBindFailed.
Comments to this Manuals