Cisco Explorer 1540 Specifications Page 439

  • Download
  • Add to my manuals
  • Print
  • Page
    / 924
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 438
6-247
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Warning-Level Alarms
Recommended Action
Restart the IP Voice Media Streaming App service or restart the server.
NotEnoughChans
Call attempt was rejected because requested gateway channel(s) could not be allocated. Some of the
more common reasons for the lack of channel to place outgoing calls include: High call traffic volume
that has the B-channels in the device fully utilized; B-channels have gone out of service for the following
reasons: Taking the channel out of service intentionally to perform maintenance on either the near- or
far-end; MGCP gateway returns an error code 501 or 510 for a MGCP command sent from Cisco Unified
Communications Manager; MGCP gateway doesn't respond to an MGCP command sent by Unified CM
three times; a speed and duplex mismatch exists on the Ethernet port between Unified CM and the
MGCP gateway.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Warning
Parameters
Device Name(String)
Recommended Action
Add more gateway resources; Check the Unified CM advanced service parameter, Change B-channel
Maintenance Status to determine if the B-channel has been taken out of service intentionally; Check the
Q.931 trace for PRI SERVICE message to determine whether a PSTN provider has taken the B-channel
out of service; Reset the MGCP gateway; Check the speed and duplex settings on the Ethernet port.
NoCallManagerFound
No Cisco Unified Communications Manager (Cisco Unified CM, formerly known as Cisco Unified
CallManager) node has been configured. A Cisco Unified Communications Manager Group exists but it
has no Cisco Unified CM node configured as its group member.
History
Cisco Unified Communications
Release Action
8.0(1) Severity changed from Error to Warning.
Device Name(String) is the only parameter
Page view 438
1 ... 438 439 440 ... 924

Comments to this Manuals

No comments