Cisco Explorer 1540 Specifications Page 532

  • Download
  • Add to my manuals
  • Print
  • Page
    / 924
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 531
6-340
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Informational-Level Alarms
MaxHoldDurationTimeout
A held call was cleared because the amount of time specified in the Maximum Hold Duration Timer
service parameter had elapsed. If the allowed call-on-hold duration is too short, you can increase the
value. If you do not want a limit on the duration of a held call, you can disable the limit.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Informational (6)
Parameters
Maximum Hold Duration (minutes) [Int]
Originating Device Name(String)
Destination Device Name(String)
Hold start time(UInt)
Hold stop time(UInt)
Calling Party Number(String)
Called Party Number(String)
Recommended Action
If the duration of the hold time is too short, increase the value in the Cisco CallManager service
parameter or disable the maximum duration by setting the Maximum Hold Duration Timer parameter to
zero.
History
Cisco Unified Communications
Release Action
8.0(1) Following parameters added:
Originating Device Name(String)
Destination Device Name(String)
Hold start time(UInt)
Hold stop time(UInt)
Calling Party Number(String)
Called Party Number(String)
Page view 531
1 ... 531 532 533 ... 924

Comments to this Manuals

No comments