6-191
Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
OL-20105-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Warning-Level Alarms
Sys Log
Event Log
Parameter(s)
CCD Maximum Numbers of Learned Patterns (UInt)
System Limit of CCD Learned Patterns (UInt)
Recommended Action
This alarm displays the value that is configured in the Cisco CallManager service parameter, CCD
Maximum Numbers of Learned Patterns, as well as the maximum number of learned patterns that are
allowed by the system (an internally-controlled maximum).
Consider whether the specified maximum number of learned patterns is correct for your deployment. If
it is too low, compare it with the number shown in the SystemLimitCCDLearnedPatterns in this alarm.
If the Max number is below the System Limit, you can go to the Service Parameters Configuration
window and increase the CCD Maximum Numbers of Learned Patterns service parameter. If the Max
and System Limit numbers match, the system is already configured to run at capacity of learned patterns;
no action is required.
CertValidLessThanMonth
Alarm indicates that the certificate will expire in 30 days or less.
Cisco Unified Serviceability Alarm Definition Catalog
System/CertMonitorAlarmCatalog
Severity
Warning(4)
Routing List
Event Log
Sys Log
Parameters
Message(String)
Recommended Action
Regenerate the certificate that is about to expire by accessing the Cisco Unified Operating System and
go to Certificate Management. If the certificate is issued by a CA, generate a CSR, submit the CSR to
CA, obtain a fresh certificate from CA, and upload it to Cisco Unified CM.
Comments to this Manuals