Cisco Explorer 1540 Specifications download pdf (Page 890)

100

101

8-132

Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)

OL-20105-01

Chapter 8 Industry-Standard Management Information Base

IF-MIB

SYNTAX INTEGER { notInUse(1), inUse(2) }

MAX-ACCESS read-write

STATUS deprecated

DESCRIPTION

This object indicates whether or not some manager currently has the necessary 'ownership' required

to invoke a test on this interface. A write to this object is only successful when it changes its value

from 'notInUse(1)' to 'inUse(2)'. After completion of a test, the agent resets the value back to

'notInUse(1)'.

::= { ifTestEntry 2 }

ifTestType OBJECT-TYPE

SYNTAX AutonomousType

MAX-ACCESS read-write

STATUS deprecated

DESCRIPTION

A control variable used to start and stop operator-initiated interface tests. Most OBJECT

IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of

interface. However, this document assigns a value for a full-duplex loopback test, and defines the

special meanings of the subject identifier:

noTest OBJECT IDENTIFIER ::= { 0 0 }

When the value noTest is written to this object, no action is taken unless a test is in progress, in

which case the test is aborted. Writing any other value to this object is only valid when no test is

currently in progress, in which case the indicated test is initiated.

When read, this object always returns the most recent value that ifTestType was set to. If it has not

been set since the last initialization of the network management subsystem on the agent, a value of

noTest is returned.

::= { ifTestEntry 3 }

ifTestResult OBJECT-TYPE

SYNTAX INTEGER { none(1), -- no test yet requested success(2), inProgress(3),

notSupported(4), unAbleToRun(5), -- due to state of system aborted(6), failed(7) }

MAX-ACCESS read-only

STATUS deprecated

DESCRIPTION

This object contains the result of the most recently requested test, or the value none(1) if no tests

have been requested since the last reset. Note that this facility provides no provision for saving the

results of one test when starting another, as could be required if used by multiple managers

concurrently.

::= { ifTestEntry 4 }

ifTestCode OBJECT-TYPE

SYNTAX OBJECT IDENTIFIER

MAX-ACCESS read-only

STATUS deprecated

DESCRIPTION

1 ... 889 890 891 ... 924

Comments to this Manuals

No comments

Cisco Explorer 1540 Specifications Page 890

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Cisco Explorer 1540