Cisco 2650 - 2650 Router Specifications download pdf (Page 111)

5-11

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

call-forward all (ephone-dn)

To configure call forwarding for all the incoming calls on one of the lines of a Cisco IP phone to another

telephone, use the call-forward all command in ephone-dn configuration mode. To disable call

forwarding, use the no form of this command.

call-forward all directory-number

no call-forward all [directory-number]

Syntax Description

Defaults No default behavior or values.

Command Modes Ephone-dn configuration

Command History

Usage Guidelines The call forwarding feature is applied to the individual telephone line associated with a directory number

and cannot be configured for all the directory numbers of a Cisco IP phone. The call-forward all

command enables call forwarding for all the incoming calls on one of the lines of a Cisco IP phone to

another telephone. Using the director- number argument is optional when using the no form of this

command.

Note The call-forward all command takes precedence over the call-forward busy and call-forward noan

commands.

Examples The following example shows how to set call forwarding of all calls on line 1, directory number 5001,

to directory number 5005. All incoming calls destined for extension 5001 are forwarded to another

Cisco IP phone with the extension number 5005:

directory-number Selected directory number. Represents a fully qualified E.164 number.

Release Modification

12.1(5)YD This command was introduced on the following platforms:

Cisco 2600 series and Cisco 3600 series multiservice routers, and

Cisco IAD2420 series IADs.

12.2(2)XT This command was implemented on the Cisco 1750 and Cisco 1751

multiservice routers.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

1 ... 110 111 112 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 111