Cisco 2650 - 2650 Router Specifications download pdf (Page 237)

5-137

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

show telephony-service dial-peer

To display the Cisco IP phone dial peers of the Cisco IOS Telephony Service router, use the show

telephony-service dial-peer command in EXEC mode.

show telephony-service dial-peer

Syntax Description This command has no arguments or keywords.

Command Modes EXEC

Command History

Usage Guidelines The dial peers cannot be edited manually. You can change the dial peers by entering the ephone-dn

command.

Examples The following is sample output from the show telephony-service dial-peer command:

Router# show telephony-service dial-peer

dial-peer voice 20025 pots

destination-pattern 5001

huntstop

port 50/0/1

dial-peer voice 20026 pots

destination-pattern 5002

huntstop

call-forward noan 5001

port 50/0/2

dial-peer voice 20027 pots

destination-pattern 5003

huntstop

port 50/0/3

Release Modification

12.1(5)YD This command was introduced on the following platforms:

Cisco 2600 series and Cisco 3600 series multiservice routers, and

Cisco IAD2420 series IADs.

12.2(2)XT This command was implemented on the Cisco 1750 and

Cisco 1751 multiservice routers.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

1 ... 236 237 238 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 237