5-56
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
ephone-dn
Usage Guidelines This is a top-level command used to configure Cisco IP phones on the Cisco IOS Telephony Service
router. By default, no directory number is configured. Therefore, you must manually enter the number
of Cisco IP phones you need to configure in your network by entering the max-ephones and max-dn
commands.
Examples The following example shows how to configure the directory numbers for the Cisco IP phone lines and
enter ephone-dn configuration mode:
Router(config)# ephone-dn 1
Router(config-ephone-dn)#
Related Commands Command Description
application Selects session-level application on a per-Cisco IP phone directory number
basis.
call-forward all Configures call forwarding for all the incoming calls on one of the lines of
a Cisco IP phone to another telephone.
call-forward busy Configures call forwarding to another number when the Cisco IP phone is
busy.
call-forward noan Configures call forwarding to another number when no answer is received
from the Cisco IP phone.
caller-id block Configures caller-ID blocking for outbound calls.
cor Configures a COR on the dial peers associated with a directory number.
description Enables an alphanumeric description label in the top black bar on the
display screen for a Cisco IP Phone 7960 and Cisco IP Phone 7940.
ephone Enters ephone configuration mode to register Cisco IP phones.
hold-alert Sets audible alert notification on the Cisco IP phone for alerting the user
about on-hold calls.
huntstop Sets the huntstop attribute for the dial peers associated with the
Cisco IP phone lines.
intercom Defines the directory number for the Cisco IP phone that connects with
another IP phone for the intercom feature.
max-dn Sets the maximum number of directory numbers that can be supported by
the router.
max-ephones Configures the maximum number of Cisco IP phones that can be supported
by the router.
mwi Configures specific Cisco IP phone directory numbers to receive MWI
notification from an external voice-mail system.
mwi sip Subscribes an extension in a Cisco IOS Telephony Service router to receive
MWI notification from a SIP MWI server.
name Configures a username associated with a directory number.
number Configures a valid number for the Cisco IP phone.
paging Sets paging numbers that can be called in order to broadcast an audio page
to a group of Cisco IP phones.
paging group Sets audio paging directory number for a large combined group.
preference Sets preference for the attached dial peer for a directory number.
Comments to this Manuals