Cisco 2650 - 2650 Router Specifications Page 161

  • Download
  • Add to my manuals
  • Print
  • Page
    / 266
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 160
5-61
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
huntstop (ephone-dn)
The following example shows a typical configuration where ephone-dn huntstop (default) is required:
ephone-dn 1
number 5001
ephone 4
button 1:1
mac-address 0030.94c3.8724
dial-peer voice 5000 voip
destination-pattern 5...
session target ipv4:223.223.223.223
In the previous example, the huntstop attribute is set to ON by default and prevents calls to extension
5001 from being re-routed to the on-net H.323 dial-peer for 5... when the 5001 extension is busy.
The following example shows another instance in which huntstop is not desired and is explicitly
disabled:
ephone-dn 1
number 5001
no huntstop
preference 1
call-forward noan 6000
ephone-dn 2
number 5001
preference 2
call-forward busy 6000
call-forward noan 6000
ephone 4
button 1:1 2:2
mac-address 0030.94c3.8724
dial-peer voice 6000 pots
destination-pattern 6000
huntstop
port 1/0/0
description answering-machine
In this example, ephone 4 is configured with two lines, each with the same extension number 5001. This
is done in order to allow the second line to provide call waiting notification for extension number 5001
when the first line is in use. Setting no huntstop on the first line (ephone-dn 1) allows incoming calls to
hunt to the second line (ephone-dn 2) on ephone 4 when the ephone-dn 1 line is busy.
The ephone-dn 2 has call forwarding set to extension 6000, which corresponds to a locally attached
answering machine connected to a Foreign Exchange Station (FXS) voice-port. In this example, the plain
old telephone service (POTS) dial-peer for extension 6000 also has the dial-peer huntstop attribute
explicitly set to prevent further hunting.
Related Commands Command Description
ephone-dn Enters ephone-dn configuration mode and configures the directory numbers
for the Cisco IP phone lines.
huntstop (dial-peer) Disables all further dial-peer hunting if a call fails using hunt groups.
Page view 160
1 ... 160 161 162 ... 266

Comments to this Manuals

No comments