5-45
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
description (ephone-dn)
description (ephone-dn)
To enable an alphanumeric description label in the top black bar on the display screen for a
Cisco IP Phone 7960 and Cisco IP Phone 7940, use the description command in ephone-dn
configuration mode. To remove the alphanumeric description label, use the no form of this command.
description text-string-with-spaces
no description text-string-with-spaces
Syntax Description
Defaults No default behavior or values.
Command Modes Ephone-dn configuration
Command History
Usage Guidelines The description command enables a meaningful alphanumeric description label in the top black bar on
the display screen for a Cisco IP Phone 7960 and Cisco IP Phone 7940 connected to the Cisco IOS
Telephony Service router. The description consists of a text string up to 16 characters in length, including
spaces, and is associated with the first (top) button of the Cisco IP phone.
Examples The following example sets directory number (DN) 5 (extension number 8001) with the description 408
555 1212 for the top line display:
Router(config)# ephone-dn 5
Router(config-ephone-dn)# number 8001
Router(config-ephone-dn)# description 408 555 1212
text-string-with-spaces Definition of the alphanumeric description for the Cisco IP phone. A
text string up to 16 characters in length, including spaces, is used.
Note Although 32 characters can fit in the top line of the phone
display, we recommend using 16 characters. If more than 16
characters are used, the extra characters will erase the
existing time and date display in the black bar.
Release Modification
12.2(11)T This command was introduced on the following platforms: Cisco 1751,
Cisco 1760, Cisco 2600 series, Cisco 3600 series, Cisco 3725, Cisco 3745
routers, and Cisco IAD2420 series IADs.
Comments to this Manuals