Cisco 2650 - 2650 Router Specifications download pdf (Page 199)

5-99

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

paging group (ephone-dn)

To set the audio paging directory number for a large combined group, use the paging group command

in ephone-dn configuration mode. To remove a paging group, use the no form of this command.

paging group paging-ephone-dn-tag-list, paging-ephone-dn-tag-list

no paging group paging-ephone-dn-tag-list, paging-ephone-dn-tag-list

Syntax Description

Defaults By default, paging is disabled on all Cisco IP phones

Command Modes Ephone-dn configuration

Command History

Usage Guidelines The paging group command is used to combine small sets of phones associated with individual paging

directory numbers (ephone-dns) into a large combined group so that a page can be sent to large numbers

of phones at once. To remove a paging group, use the no form of the command. All ephone-dn tags

included in the list must have the paging command set.

The use of paging groups allows phones to participate in a small local paging set (for example, paging

to four phones in a company’s shipping and receiving department) but also supports company-wide

paging when needed (for example, by combining the paging sets for shipping and receiving with paging

sets for accounting, customer support, and sales into a paging group).

Examples The following example shows how to set paging groups:

ephone-dn 20

number 2000

paging -phone-dn-tag-list A comma-separated list of directory number (DN) tags that are each

configured as paging directory numbers. You can include up to ten

paging Cisco IP phone DN tags separated by commas; for example, 4, 6,

7, 8.

Release Modification

12.2(2)XT This command was introduced on the following platforms: Cisco 1750,

Cisco 1751, Cisco 2600 series, and Cisco 3600 series multiservice routers,

and Cisco IAD2420 series IADs.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

1 ... 198 199 200 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 199