Cisco 2650 - 2650 Router Specifications download pdf (Page 17)

1-5

Cisco IOS Telephony Service, Version 2.02

Chapter 1 Cisco IOS Telephony Service Overview

Where to Go Next

Cisco IP Phone Requirements

Cisco ITS Version 2.02 supports the following Cisco IP phones:

• Cisco IP Phone 7910

• Cisco IP Phone 7940

• Cisco IP Phone 7960

• Cisco IP Conference Station 7935

• ATA - 18 6

Firmware Requirements

The most current Cisco IP phone firmware versions are at

http://www.cisco.com/cgi-bin/tablebuild.pl/ip-key.

The Cisco multiservice routers provide support for updating and storing of Cisco IP phone firmware.

The Cisco IOS Telephony Service router also provides TFTP support for downloading the phone

firmware files to the phone.

Note When installing new Cisco IP phones to an ITS ATA device configuration, remove the tftp-server

flash:XMLDefault.cnf.xml command temporarily (see link to Configuration Example, at the end of

Chapter 2) until the new phones are installed properly. After the phones are installed and working

correctly, restore the tftp-server flash:XMLDefault.cnf.xml command.

A way to verify correct phone load installation is to set registration debugging with the debug ephone

re-registration. The "Load=" parameter should appear in the display, followed by an abbreviated version

name corresponding to the phone load file name.

Where to Go Next

• To configure basic functionality for Cisco ITS, refer to“Required Configuration Tasks”.

• See “Additional Configuration Tasks” to configure the following features:

–

Date and time

–

Dial-plan pattern

–

Local directory

–

Keepalive

–

Interdigit timeout

–

Three-party G.711 conference calls

–

Music on hold

–

Transfer of calls

–

URL provisioning

–

Speed-dial

1 ... 16 17 18 ... 266

Comments to this Manuals

No comments

Cisco 2650 - 2650 Router Specifications Page 17

Comments to this Manuals

Related products and manuals for Networking Cisco 2650 - 2650 Router