Cisco 2650 - 2650 Router Specifications download pdf (Page 188)

5-88

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

mwi relay (telephony-service)

To enable the Cisco IOS Telephony Service router to relay message waiting indication (MWI)

information to remote Cisco IP phones, use the mwi relay command in telephony-service configuration

mode. To disable MWI relay, use the no form of this command.

mwi relay

no mwi relay

Syntax Description This command has no arguments or keywords.

Defaults No default behavior or values.

Command Modes Telephony-service configuration

Command History

Usage Guidelines The mwi relay command enables the Cisco IOS Telephony Service router to relay MWI information to

remote Cisco IP phones. The Cisco IOS Telephony Service router at the central site acts as a notifier

after the mwi relay command is configured.

Examples The following example shows how to set MWI relay:

Router(config)# telephony-service

Router(config-telephony-service)# mwi relay

Related Commands

Release Modification

12.2(2)XT This command was introduced on the following platforms: Cisco 1750,

Cisco 1751, Cisco 2600 series, and Cisco 3600 series multiservice routers,

and Cisco IAD2420 series IADs.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

Command Description

mwi expires Sets the expire timer for registration for either the client or server.

show mwi relay clients Displays the list of MWI relay clients’ registration information.

telephony-service Enables Cisco IOS Telephony Service and enters telephony-service

configuration mode.

1 ... 187 188 189 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 188