Cisco 2650 - 2650 Router Specifications download pdf (Page 253)

5-153

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

transfer-pattern (telephony-service)

To allow transfer of telephone calls by Cisco IP phones to other phone numbers, use the

transfer-pattern command in telephony-service configuration mode. To disable transfer of calls to other

numbers, use the no form of this command.

transfer-pattern transfer-pattern

no transfer-pattern

Syntax Description

Defaults Cisco IP phone to Cisco IP phone transfer only.

Command Modes Telephony-service configuration

Command History

Usage Guidelines The transfer-pattern command allows you to transfer a call to non-IP phone numbers. The call is

established between the other calling party and the new recipient. By default, all Cisco IP phone

directory numbers are allowed as transfer targets.

Examples The following example shows how to set the transfer pattern:

Router(config)# telephony-service

Router(config-telephony-service)# transfer-pattern 55540..

A maximum of 32 transfer patterns can be entered. In the previous example, 55540.. (the two decimal

points are used here as wild cards) permits transfers to any numbers in the range 555-4000 to

525-4099.

transfer-pattern Digit string for permitted call transfers.

Release Modification

12.1(5)YD This command was introduced on the following platforms:

Cisco 2600 series and Cisco 3600 series multiservice routers, and

Cisco IAD2420 series IADs

12.2(2)XT This command was implemented on the Cisco 1750 and

Cisco 1751 multiservice routers.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

1 ... 252 253 254 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 253