Cisco 2650 - 2650 Router Specifications download pdf (Page 191)

5-91

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

mwi sip-server (telephony-service)

To configure IP address and port for the external Session Initiation Protocol (SIP)-based message

waiting indication (MWI) server, use the mwi sip-server command in telephony-service configuration

mode. To disable the MWI server, use the no form of this command.

mwi sip-server ip-address [[transport tcp | transport udp] | [port port-number] | [reg-e164]]

no mwi sip-server ip-address

Syntax Description

Defaults Default transport layer protocol is TCP.

Default port number is 5060 (SIP standard port).

Default registration is with an extension number.

Command Modes Telephony-service configuration

Command History

Usage Guidelines The mwi sip-server command configures the IP address of an external SIP MWI server. This IP address

is used in conjunction with the mwi sip (ephone-dn) command to subscribe individual ephone-dn

extension numbers to the MWI SIP server’s notification list. SIP MWI client runs TCP as default.

The transport tcp keyword is the default setting. The transport udp keyword allows you to integrate

with SIP MWI client. The optional port keyword is used to specify a port number. The default SIP port

number is 5060. The default registration is with an extension number, so the reg-e164 keyword allows

you to register with an E.164 te- digit number.

ip-address The IP address and port of the MWI server.

transport tcp (Optional) Transport layer protocol is TCP. The default is TCP.

transport udp (Optional) Transport layer protocol is User Datagram Protocol (UDP).

port (Optional) Default SIP port.

port-number (Optional) The SIP port number. The default SIP port number is 5060.

reg-e164 (Optional) Regular E.164 ten-digit number.

Release Modification

12.2(2)XT This command was introduced on the following platforms: Cisco 1750,

Cisco 1751, Cisco 2600 series, and Cisco 3600 series multiservice routers,

and Cisco IAD2420 series IADs.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

1 ... 190 191 192 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 191