Cisco 2650 - 2650 Router Specifications download pdf (Page 249)

5-149

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

time-format (telephony-service)

To set the time display format on all the Cisco IP phones attached to the router, use the time-format

command in telephony-service configuration mode. To disable the time display format, use the no form

of this command.

time-format {12 | 24}

no time-format {12 | 24}

Syntax Description

Defaults The default is set to 12 hours.

Command Modes Telephony-service configuration

Command History

Usage Guidelines The time-format command sets the time display format on all the Cisco IP phones attached to the router.

Examples The following example sets the time format on the Cisco IP phones to the 24-hour setting:

Router(config)# telephony-service

Router(config-telephony-service)# time-format 24

Related Commands

12 Set in 12-hour increments.

24 Set in 24-hour increments.

Release Modification

12.2(2)XT This command was introduced on the following platforms: Cisco 1750,

Cisco 1751, Cisco 2600 series and Cisco 3600 series multiservice routers;

and Cisco IAD2420 series IADs.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

Command Description

telephony-service Enables Cisco IOS Telephony Service and enters telephony-service

configuration mode.

1 ... 248 249 250 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 249