Cisco 2650 - 2650 Router Specifications download pdf (Page 208)

5-108

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

pattern ext-to-ext no-answer (vm-integration)

To configure the dual-tone multifrequency (DTMF) digit pattern forwarding necessary to activate the

voice-mail system once an internal extension fails to connect to an extension and the call is forwarded

to voice mail, use the pattern ext-to-ext no-answer command in voice-mail integration configuration

mode. To disable DTMF digit pattern forwarding, use the no form of this command.

pattern ext-to-ext no-answer tag1 {CGN | CDN | FDN} [tag2 {CGN | CDN | FDN}]

[tag3 {CGN | CDN | FDN}] [last-tag]

no pattern ext-to-ext no-answer tag1 {CGN | CDN | FDN} [tag2 {CGN | CDN | FDN}]

[tag3 {CGN | CDN | FDN}] [last-tag]

Syntax Description

Defaults This feature is disabled by default.

Command Modes Voice-mail integration configuration

Command History

tag1 (Required) Alphanumeric string fewer than four DTMF digits in length. The

alphanumeric string consists of a combination of four letters (A, B, C, and

D), two symbols (* and #), and ten digits (0 to 9). The tag numbers match

the numbers defined in the voice-mail system’s integration file,

immediately preceding either the number of the calling party, the number of

the called party, or a forwarding number.

tag2, tag3 (Optional) See tag1. The Cisco IOS Telephony Service router supports a

maximum of four tags.

last-tag (Optional) See tag1.This tag indicates the end of the pattern.

CGN Calling number (CGN) information is sent to the voice-mail system.

CDN Called number (CDN) information is sent to the voice-mail system.

FDN Forwarding number (FDN) information is sent to the voice-mail system.

Release Modification

12.2(2)XT For Cisco IOS Telephony Service, this command was introduced on the

Cisco 1750, Cisco 1751, Cisco 2600 series, Cisco 3600 series multiservice

routers, and Cisco IAD2420 series IADs.

12.2(8)T For Cisco IOS Telephony Service, this command was integrated into

Cisco IOS Release 12.2(8)T and implemented on the Cisco 3725 and

Cisco 3745 routers.

12.2(8)T1 For Cisco IOS Telephony Service, this command was implemented on the

Cisco 2600-XM and Cisco 2691 routers.

12.2(11)T For Cisco IOS Telephony Service, this command was integrated into Cisco

IOS Release 12.2(11)T and implemented on the Cisco 1760 routers.

12.2(13)T This command was implemented in Cisco Survivable Site Remote

Telephony, Version 2.02.

1 ... 207 208 209 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 208