Cisco 2650 - 2650 Router Specifications download pdf (Page 184)

5-84

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

mwi (ephone-dn)

To configure specific Cisco IP phone directory numbers to receive message waiting indication (MWI)

notification from an external voice-mail system, use the mwi command in ephone-dn configuration

mode. To disable this feature, use the no form of this command.

mwi {off | on | on-off}

no mwi {off | on | on-off}

Syntax Description

Defaults No default behavior or values.

Command Modes Ephone-dn configuration

Command History

Usage Guidelines The mwi command configures specific Cisco IP phone directory numbers to receive MWI notification

from an external voice-mail system. The notification is set for all the Cisco IP phones connected to the

Cisco IOS Telephony Service router. The external voice-mail systems are often able to communicate

MWI status by making telephone calls to dummy extension numbers, where the MWI information is

embedded in either the called or calling party IP phone number. This command cannot be configured

unless the number command is configured in ephone-dn configuration mode.

Examples The following example shows how to MWI indication to ON:

Router(config)# ephone-dn 1

Router(config-ephone-dn) number 8000

off Sets Cisco IP phone directory number to process MWI notification to OFF

setting using either the main or secondary phone number.

on Sets Cisco IP phone directory number to process MWI notification to ON

setting using either the main or secondary phone number.

on-off Sets Cisco IP phone directory number to process MWI notification to both

ON and OFF setting using the main or secondary phone number.

Release Modification

12.2(2)XT This command was introduced on the following platforms: Cisco 1750,

Cisco 1751, Cisco 2600 series, and Cisco 3600 series multiservice routers,

and Cisco IAD2420 series IADs.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

1 ... 183 184 185 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 184