4-27
Cisco IOS Telephony Service, Version 2.02
Chapter 4 Advanced Configuration Tasks
Integrating Cisco IOS Telephony Service with Applications
Cisco IOS TSP Download and Setup
On the Cisco ITS Service Router
Step 1 On the router collect the following information for TSP configuration:
• Identify the Cisco IP phone that needs to be associated and controlled by a TAPI client.
• Get the username and password for the Cisco IP phone by entering the show ephone command.
• Get the IP address or name of the Cisco IOS Telephony Service router (if DNS is enabled) and the
port number by entering the show telephony-service command.
On the PC
Note Download the CiscoIOSTSP.zip file from http://www.cisco.com/cgi-bin/tablebuild.pl/ip-iostsp to your
PC. Uncompress the file and run the Setup program on the PC where you want to install the TSP, and
that is running Windows 2000.
Step 1 Make sure that there is network connectivity between your PC and the Cisco IOS Telephony Service
router. To verify the network connectivity, enter the ping ip-address command on your PC, specifying
the IP address of the Cisco IOS Telephony Service router.
Step 2 Install CiscoIOSTSP.zip by running the Setup program that was downloaded. This program installs the
following dynamic link library (DLL) files in the system directory of the PC:
• CiscoIOSTSP.tsp
• CiscoIOSTUISP.dll
• LogTrace.dll
Note After the DLL files are installed, a configuration dialog window, Cisco IOS Telephony Service Provider,
appears before the installation is complete (shown in Figure 4-14).
Step 3 Enter the information in the required fields in the dialog box, as shown in Figure 4-14.
a. Enter the username and password that will be used by the Cisco IP phone user.
b. Enter the IP address and port number of the Cisco IOS Telephony Service router.
c. Set the Synchronous Timeout response from the Cisco IOS Telephony Service to the desired value
in seconds. (The default is 3 seconds.)
d. If you are using the headset, check the Using HeadSet box.
Comments to this Manuals