Cisco 2650 - 2650 Router Specifications download pdf (Page 214)

5-114

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

preference (ephone-dn)

To set preference order for the directory number associated with a Cisco IP phone, use the preference

command in ephone-dn configuration mode. To put the directory number in default preference order, use

the no form of this command.

preference preference-order

no preference preference-order

Syntax Description

Defaults The default is 0 (the highest preference).

Command Modes Ephone-dn configuration

Command History

Usage Guidelines The preference command sets preference order for the directory number (ephone-dn) associated with a

Cisco IP phone. Use the preference command to indicate the preference order for matching dial peers

in a Cisco IP phone virtual dial-peer group. Setting the preference enables the desired dial peer to be

selected when multiple dial peers within a hunt group are matched for a dial string.

Examples The following example sets a preference of 2 for the directory number 3000:

Router(config)# ephone-dn 1

Router(config-ephone-dn)# number 3000

Router(config-ephone-dn)# preference 2

preference-order The preference order is 0 to 10; 0 is the highest preference and 10 is the

lowest preference.

Release Modification

12.1(5)YD This command was introduced on the following platforms: Cisco 2600

series and Cisco 3600 series multiservice routers, and Cisco IAD2420

series IADs.

12.2(2)XT This command was implemented on the Cisco 1750 and Cisco 1751

multiservice routers.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

1 ... 213 214 215 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 214