Cisco 2650 - 2650 Router Specifications download pdf (Page 234)

5-134

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

show telephony-service all

To display the detailed configuration of all Cisco IP phones, voice ports, and dial peers of the

Cisco IOS Telephony Service router, use the show telephony-service all command in EXEC mode.

show telephony-service all

Syntax Description This command has no arguments or keywords.

Command Modes EXEC

Command History

Examples The following is sample output from the show telephony-service all command:

Router# show telephony-service all

CONFIG

======

ip source-address 10.0.0.1 port 2000

max-ephones 24

max-dn 24

dialplan-pattern 1 408734....

voicemail 11111

transfer-pattern 510734....

keepalive 30

ephone-dn 1

number 5001

huntstop

ephone-dn 2

number 5002

huntstop

call-forward noan 5001 timeout 8

ephone-dn 3

number 5003

Release Modification

12.1(5)YD This command was introduced on the following platforms:

Cisco 2600 series and Cisco 3600 series multiservice routers, and

Cisco IAD2420 series IADs.

12.2(2)XT This command was implemented on the Cisco 1750 and

Cisco 1751 multiservice routers.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

1 ... 233 234 235 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 234