Cisco 2650 - 2650 Router Specifications download pdf (Page 218)

5-118

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

reset (telephony-service)

To reset the Cisco IP phones associated with the Cisco IOS Telephony Service router, use the reset

command in telephony-service configuration mode.

reset {all seconds | mac-address mac-address}

Syntax Description

Defaults No default behavior or values.

Command Modes Telephony-service configuration

Command History

Usage Guidelines The reset command does not have a no form.

The reset command resets the Cisco IP phones attached to the router. You can use the all keyword to

reset all Cisco IP phones attached to the router or to reset a specific Cisco IP phone by entering the

mac-address keyword and the MAC address of that specific Cisco IP phone.

The reset command does not have a no form.

Examples The following example shows how to reset all Cisco IP phones:

Router(config)# telephony-service

Router(config-telephony-service)# reset all

all All Cisco IP phones.

seconds Time interval, in seconds, between each phone reset. The range is

from 0 to 15 seconds.

mac-address mac-address MAC address of a particular Cisco IP phone.

Release Modification

12.1(5)YD This command was introduced on the following platforms:

Cisco 2600 series and Cisco 3600 series multiservice routers, and

Cisco IAD2420 series IADs.

12.2(2)XT This command was implemented on the Cisco 1750 and

Cisco 1751 multiservice routers.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

1 ... 217 218 219 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 218