5-159
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
username (ephone)
username (ephone)
To assign a phone user a login account username and password to permit user login to the Cisco IOS
Telephony Service router through a web browser, use the username command in ephone configuration
mode. To disable this feature, use the no form of this command.
username username password password
no username username password password
Syntax Description
Defaults The default username for the administrator is Admin.
Command Modes Ephone configuration
Command History
Usage Guidelines The username command assigns a login account username and password for a phone user and
establishes a login account associated with each Cisco IP phone (ephone).
A login account must also be created to allow Telephone Application Programming Interface
(TAPI)-aware PC applications to register with the Cisco IOS Telephony Service router and exercise
remote control operation of a Cisco IP phone.
Note This configuration can be completed only by the local system administrator of the Cisco IOS Telephony
Service router.
This configuration permits the phone user to log in to the Cisco IOS Telephony Service to display and
change attributes associated only with the user’s IP phone.
username The username of the local Cisco IP phone user.
password Enables password for the Cisco IP phone user.
password Password string.
Release Modification
12.2(2)XT This command was introduced on the following platforms: Cisco 1750,
Cisco 1751, Cisco 2600 series, and Cisco 3600 series multiservice routers,
and Cisco IAD2420 series IADs.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.
Comments to this Manuals