Cisco 2650 - 2650 Router Specifications Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 266
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
2-4
Cisco IOS Telephony Service, Version 2.02
Chapter 2 Required Configuration Tasks
Information About Cisco ITS Version 2.02
Figure 2-2 shows a branch office with several Cisco IP phones connected to a
Cisco IAD2420 series with the Cisco IOS Telephony Service. The Cisco IAD2420 series IAD is
connected to a multiservice router at a service provider office. The multiservice router at the service
provider office provides connection to the WAN and PSTN.
Figure 2-2 Cisco IOS Telephony Service for the Service Providers
Additional Features
Provisioning
The router provides a mechanism to provision Cisco IOS Telephony Service. This provisioning interface
allows you to perform the following functions:
Assign directory numbers to the line appearances on each Cisco IP phone.
Assign numbers to the speed-dial buttons on each Cisco IP phone.
Assign caller identification information to each directory number.
Assign directory numbers to phones other than Cisco IP phones attached to the system by using the
standard voice-port and dial-peer configuration command line interface (CLI).
Provide dial-plan information to route calls either to PSTN lines or voice network connections.
Hot-Plug Cisco IP Phones
The Cisco IP phones can be hot-plugged and unplugged to the Cisco IOS Telephony Service router
without requiring a router reboot or manual status reset.
V
IAD
IP IP IP
PSTN
IP
network
Cisco IAD2430
Service
provider
office
Fax
Voice
switch
Telephone Telephone
Cisco IP phones
Gatekeeper
T1/DSL/Cable
Voice-mail
server
PCs
62145
Page view 23
1 ... 23 24 25 ... 266

Comments to this Manuals

No comments