Cisco 2650 - 2650 Router Specifications download pdf (Page 81)

4-15

Cisco IOS Telephony Service, Version 2.02

Chapter 4 Advanced Configuration Tasks

Integrating Voice Mail

Configuring a Directory Number for MWI Notification

MWI integration on the Cisco IOS Telephony Service router is performed by dedicating Cisco IP phone

DNs (ephone-DNs) to process MWI status notification calls originating from the Cisco Unity Voice Mail

system. You must allocate a minimum of one MWI processing ephone-dn for each MWI ephone-dn

access port. The MWI processing ephone-dn extension numbers are configured to match the MWI

dial-out notification numbers configured on the Cisco Unity Voice Mail system.

SUMMARY STEPS

1. ephone-dn dn-tag

2. number number [secondary number]

3. mwi {on | off | on-off}

DETAILED STEPS

Step 3

Router(config-ephone-dn)# name name

Configures a username associated with a directory

number to receive MWI notification.

For example, “MWI” is used in place of the name

argument.

Step 4

Router(config-ephone-dn)# mwi sip

Subscribes an extension in a Cisco IOS Telephony

Service router to receive MWI notification from a SIP

MWI server. This integrates a Cisco IOS Telephony

Service router with an MWI service based on SIP

protocol.

Note The mwi sip-server command under

telephony-service configuration mode should

be set prior to enabling the mwi sip command

in ephone configuration mode.

Command Purpose

Step 1

Router(config)# ephone-dn dn-tag

Enters ephone-dn configuration mode and configures the

directory numbers for the Cisco IP phone lines.

1 ... 80 81 82 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 81