Cisco 2650 - 2650 Router Specifications Page 239

  • Download
  • Add to my manuals
  • Print
  • Page
    / 266
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 238
5-139
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
show telephony-service ephone
show telephony-service ephone
To display configuration for the Cisco IP phones, use the show telephony-service ephone command in
EXEC mode.
show telephony-service ephone
Syntax Description This command has no arguments or keywords.
Command Modes EXEC
Command History
Examples The following is sample output from the show telephony-service ephone command:
Router# show telephony-service ephone
ephone 1
mac-address 0030.94C3.37CB
type 0
button 1:1
speed-dial 1 5002
speed-dial 2 5003
cos 0
!
ephone 2
mac-address 0030.94C3.F96A
type 0
button 1:2 2:3 3:4
speed-dial 1 5004
speed-dial 2 5001
cos 0
!
Table 5-7 provides an alphabetic listing of the command fields in the sample output.
Release Modification
12.1(5)YD This command was introduced on the following platforms:
Cisco 2600 series and Cisco 3600 series multiservice routers, and
Cisco IAD2420 series IADs.
12.2(2)XT This command was implemented on the Cisco 1750 and
Cisco 1751 multiservice routers.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.
Page view 238
1 ... 238 239 240 ... 266

Comments to this Manuals

No comments