Cisco 2650 - 2650 Router Specifications download pdf (Page 77)

4-11

Cisco IOS Telephony Service, Version 2.02

Chapter 4 Advanced Configuration Tasks

Integrating Voice Mail

DETAILED STEPS

Configuring Message Waiting Indication

The MWI mechanism turns on the light indicator on Cisco IP phones to inform you that you have a

voice-mail message. Figure 4-5 shows a network with a Cisco IP phone and a Cisco IOS Telephony

Service router connected to a Cisco Unity Voice Mail system.

Figure 4-5 Basic MWI Network

Command Purpose

Step 1

Router(config)# ephone tag

Enters ephone configuration mode to register

Cisco IP phones.

Step 2

Router(config-ephone)# vm-device-id id-string

Defines the voice-mail ID string. For example,

CiscoUM-VI1 for the first port and CiscoUM-VI2

for the second port, and so on. The default is

CiscoUM-VI1.

Step 3

Router(config-ephone)# button button-number:dn-tag

button-number:dn-tag

Assigns a button number to the Cisco IP phone

directory number. The argument

button-number:dn-tag, for example, can use the

values 1:1, 2:4, or 3:14. In this example, button 1

corresponds to directory number 1 (ephone-dn 1),

button 2 corresponds to directory number 4, and

button 3 corresponds to directory number 14. The

buttons correspond to the phone lines on the

Cisco IP phone.

PSTN

2001

Cisco Unity

Voice Mail

4001

10.10.12.1

2001-2049

62700

1 ... 76 77 78 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 77