Cisco 2650 - 2650 Router Specifications download pdf (Page 155)

5-55

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

ephone-dn

To configure the directory numbers for the Cisco IP phone lines, voice-mail ports, and message waiting

indication (MWI) code, and to enter ephone-dn configuration mode, use the ephone-dn command in

global configuration mode. To disable the directory numbers for the Cisco IP phone lines, use the no

form of this command.

ephone-dn dn-tag

no ephone-dn dn-tag

Syntax Description

Defaults No directory number is configured.

Command Modes Global configuration

Command History

dn-tag Directory number tag.

The maximum directory number is platform dependent:

• Cisco 1750—96 directory number

• Cisco 1751—96 directory numbers

• Cisco 2600 series—96 directory numbers

• Cisco 2600-XM series—96 directory numbers

• Cisco 3620—96 directory numbers

• Cisco 3640—192 directory numbers

• Cisco 3660—192 directory numbers

• Cisco 3725—192 directory numbers

• Cisco 3745—192 directory numbers

• Cisco IAD2420 series—96 directory numbers

Release Modification

12.1(5)YD This command was introduced on the following platforms:

Cisco 2600 series and Cisco 3600 series multiservice routers, and

Cisco IAD2420 series IADs.

12.2(2)XT This command was implemented on the Cisco 1750 and

Cisco 1751 multiservice routers.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

1 ... 154 155 156 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 155